STANDARD PLASTIC MATT WHITE

Product Description

A water-based, decorative interior wall paint with a matte finish, formulated with acrylic copolymer resin.

Properties

- Offers high coverage and adheres well to recommended surfaces.
- Applies easily and spreads smoothly.
- Allows surfaces to breathe.
- Odorless and environmentally friendly.

Application

It applies effortlessly to various surfaces including plaster, exposed and gas concrete, concrete panels, plasterboard, walls and ceilings with old paint, MDF, and OSB, following the recommended surface preparation and priming procedures. Applied on easily all kinds of mineral substrates. The application areas should be dry, clean and free from dust. To minimize paint usage on the final coat and enhance penetration, it is advisable to apply a single coat of primer. For older surfaces, particularly those painted with synthetic paints, we suggest using "Premium Cover Primer", for new surfaces (especially gymsum board) please use “Premium Transparent Primer” or "Premium Concentrated Primer 1:7".

Apply 2 coats of “Standard Plastic Matt” diluted with 20% of water. Wait 2-3 hours between coats. Temperature for application is between +5 °C and +35 °C.

Drying Time

Touch dry: 30-40 minutes
Recoat: 3-4 hours
Full Cure: 24 hours (23°C, 50% R.H.)

Consumption

Approximately 12-14 m²/lt for one coat application depending on the surface.

Storage

Store in dry, cool places and protect from freeze. Storage temperature should be between 5°C and 35°C.

Technical Data Sheets (TDS)

Safety Sheets