PREMIUM CONCENTRATED PRIMER 1:7

Product Description

Water based, acrylic resin based, concentrated and transparent lining suitable for  interior and exterior usage. With its strong adherence feature, it creates a bridge between the top coat paint and the ground and allows the paint to stay on the surface without swelling, without breaking off the surface, without cracking in a thin layer.

Properties

• Exceptional penetration capabilities minimize absorption on highly porous surfaces, reducing paint consumption for the final coat.
• Enhances paint adhesion by creating a resilient surface, serving as a crucial link between the top coat and substrate.
• Robust adhesion ensures thin and secure paint application, preventing blistering, splitting, and cracking.

Application

“Premium Concentrated Primer 1:7” should be diluted with the following ratio and used with roll brush or brush: 1 cup 1:7 Concentrated PRIMER + 7 cups of Water. The product should not be used without diluting. It should not be used as primer on top coats of synthetic paint applications. Otherwise, it might cause problems such as cracks,  listering and stripping.

It can be easily applied on all kinds of gypsum, plaster, limewash, exposed and gas concrete, betopan, drywall, walls and ceilings with old absorbent paintings and such other highly absorbent surfaces. All surfaces must be clean, dry and dust free. Apply 1 coat of “Premium Concentrated Primer 1:7” with a brush or roller. Please dilute 1 primer to 7 water ratio. Application temperature should be between +5 °C and +35 °C.

Drying Time

Touch dry: 1-3 hours.
Full Cure: 6-8 hours. (23°C, 50% R.H.)

Consumption

Approximately 40-60 m²/lt depending on surface. 

1 coat is enough to obtain the required for optimal appearance and hiding power. Additional coats may be necessary for dramatic colour changes, deeper shades of yellow, orange and red colours or over rough surfaces. Actual coverage may vary depending on substrate and application method.

Storage

Store in dry, cool places and protect from freeze. Storage temperature should be between 5 °C and 35 °C.

Technical Data Sheets (TDS)

Safety Sheets